Tilbud!

Metal Servo DSS-M15S 270°, 15KG, DF with Analog Feedback | Populær

Den oprindelige pris var: 195,00 kr..Den aktuelle pris er: 81,90 kr..

Laveste pris de sidste 30 dage
PÅ LAGER FRAGT FRA 80,00 kr.
30-dages returpolitik. Er det ikke noget for dig? Returnér inden for 30 dage fra levering.
Fri fragt ved køb over 450,00 kr.
Læs mere
Brug for hjælp? Kontakt vores kundeservice.
Læs mere
Varenummer (SKU): SKOT9503Y98 Kategori:

IntroductionDSS-M15S servos have been well received by customers in these years. It has extremely wide angle range control, huge load capacity and excellent quality. This DSS-M15S with analog feedback has broken its internal potentiometer signal. This is an analog signal with 0~3.3V feedback. You can connect it to MCU to realize close-loop feedback control.
DSS-M15S 270 Metal servo with feedback is compatible with Arduino Servo library. You can drive it with Arduino Board and read the angle value from analog side.
Angle-Analog Value
Dimension
How to control DSS-M15S servos with Analog Feedback – DFROBOT
SpecificationElectronic specifications

  • Operating voltage: 4.8-7.2V
  • 6V test environment

  • Operating speed (no load): 0.18 sec/60 degrees
  • Resting current: 80mA
  • Locking torque: 11.5KG*cm
  • Stall current: 1.4A
  • Standby current: 4mA
  • 7V test environment

  • Operating speed (no load): 0.16sec/60 degrees
  • Resting current: 100mA
  • Locking torque: 12KG*cm
  • Stall current: 1.76A
  • Standby current: 5mA
  • Mechanical specifications

  • Gear material: metal gear
  • Operating angle: 270 degrees
  • Wiring gauge: 28PVC
  • Data line length: 320mm
  • Gear bracket spline: 25T/5.80
  • Gear ratio: 310:1
  • Size: 54.5*20*47.5mm
  • Control specifications

  • Feedback signal: 0-3.3V
  • Control signal: RC PWM
  • Pulse range: 500-2500 us
  • Median signal value: 1500us
  • Clockwise rotation: <1500us
  • Control frequency: 50-330Hz (Arduion compatible)
  • Shipping List

  • DSS-M15S 270 servo with analog feedbackx1
  • Crossed horn x1
  • Long straight horn x1
  • Short straight horn x1
  • M2*8 self-tapping screws and gasket x5
  • M3*6 screw x1
  • DocumentsProduct wiki