Realtek Ameba-RTL8195AM WiFi NFC Module, ARM Cortex M3, USB OTG | Favorit blandt kunder

  • Hjem » Butik » Realtek Ameba-RTL8195AM WiFi NFC Module, ARM Cortex M3, USB OTG | Favorit blandt kunder
Tilbud!
Realtek Ameba-RTL8195AM WiFi NFC Module, ARM Cortex M3, USB OTG | Favorit blandt kunder

Realtek Ameba-RTL8195AM WiFi NFC Module, ARM Cortex M3, USB OTG | Favorit blandt kunder

Den oprindelige pris var: 120,00 kr..Den aktuelle pris er: 50,40 kr..

Laveste pris de sidste 30 dage
PÅ LAGER FRAGT FRA 80,00 kr.
30-dages returpolitik. Er det ikke noget for dig? Returnér inden for 30 dage fra levering.
Fri fragt ved køb over 450,00 kr.
Læs mere
Brug for hjælp? Kontakt vores kundeservice.
Læs mere
Varenummer (SKU): SKOT9503YI1 Kategori:

IntroductionAmeba-RTL8195AM is an IoT (Internet of things) microcontroller developed by Realtek. It combines an ARM-Cortex M3 MCU, Wi-Fi and NFC (Near Field Communication) in a single chip. It provides high speed connectivity interface, such as USB 2.0 host, USB 2.0 device, SDMMC HS, SDIO device and MII/RMMII interfaces. It also provides a bunch of configurable GPIOs which are configured as digital peripherals for different applications and control usage. Moreover, the chip also has SPI, I2C, UART serial communication interfaces, and ADC & DAC analog interfaces.
Realtek, as one of the biggest suppliers of Wi-Fi solution, its Ameba-RTL8195AM offers trustworthy stability and reliability. Ameba-RTL8195AM, the first low power consuming IoT chip integrates Ethernet and NFC. It is a cheap and reliable choice for IoT developers.
Caution: RTL8195AM is developer-oriented and some functions are still in testing. Please check the official website for more details.

Features

  • Support for Arduino and Micropython programing
  • Supports 802.11 b/g/n 1×1 Wi-Fi
  • Supports NFC read/write
  • 10/100 Ethernet MII/ RMII/RGMII interface
  • Supports USB OTG
  • Supports SDIO device/SD card controller
  • Hardware: SSL engine
  • 30 x GPIO(Maximum)
  • Supports 2 x SPI master-slave interface communication
  • Supports 3 x UART interface (2x HS-UART & 1x log UART)
  • Supports 2 x I2C master-slave interface communication
  • Supports 2 x I2S/PCM master-slave interface communication
  • Supports 4 x PWM
  • Supports 2 x ADC
  • Supports 1 x DAC
  • Supports ultra-low power consumption
  • Fast response (up to 400KHz)

    • Specification

  • Operating Voltage: 3.0V~3.3V
  • Micro-Controller: 32-bit ARM Cortex M3166MHz
  • Antenna Connector: U.FL
  • ROM/RAM/Flash: 1MB ROM2MB SDRAM512KB SRAM
  • Wireless Network Mode: station / softAP/ SoftAP+station
  • Data rate: 802.11g 54Mbps (Max.), 802.11n 150Mbps (Max.)
  • Operating Temperature range: -20~+85
  • Dimensions: 19 x 24mm/0.75 x 0.94(inches)

    • Shipping ListRealtek Ameba-RTL8195AM WiFi & NFC Modulex1

    DocumentsAmeba Arduino Environment Setup
    RTL8195AM Datasheet
    Ameba-RTL8195AM Schematic
    Ameba-RTL8195AM Layout
    Ameba-RTL8195AM User Manual

    Relaterede varer