Introduction
The 8×8 RGB LED Matrix! This module is a square panel with a XH2.54 3-pin interface.
This 8×8 RGB full-color LED matrix module is based on WS2812 intelligent control LEDs. Each LED can be independently addressed with RGB pixels that can achieve 256 levels of brightness. Thats 16777216 colors in total with a scanning frequency no less than 400Hz!
The 8×8 RGB LED Matrix is single wire control board. The module also supports cascading control. All you need to do is connect Din to the DOUT port. In combination with the open source Arduino library, you can control an entire array of LEDs using just one pin!
Note: Each LED requires a maximum current of 18mA. When multiple modules are in use, it is recommended to use external power supply to power multiple LEDs matrix.
Features

Specification

Shipping List

Documents